MKMSGF
)b*N+P,
;";%;(;+;.;1;4;7;:;=;@;C;F;I;L;O;R;U;X;[;^;a;d;g;j;m;p;s;v;y;|;
<!<$<'<*<-<0<3<6<9<<<?<B<E<H<K<N<Q<T<W<Z<]<`<c<f<i<l<o<r<u<x<{<~<
= =#=&=)=,=/=2=5=8=;=>=A=D=G=J=M=P=S=V=Y=\=_=b=e=h=k=n=q=t=w=z=}=
>">%>(>+>.>1>4>7>:>=>@>C>F>I>L>O>R>U>X>[>^>a>d>g>j>m>p>s>v>y>|>
?!?$?'?*?-?0?3?6?9?<???B?E?H?K?N?Q?T?W?Z?]?`?c?f?i?l?o?r?u?x?{?~?
B+DWD
KI Error:  Error reading message file, NWSETUP.MSG.
I Error:  Insufficient memory.
I Error:  NetWare Connectivity Setup initialization failure.
I Error:  Background window refresh failure.
I NetWare Connectivity Setup Program
I Already Installed \
@0,1,"
The NetWare Connectivity Setup program has detected
that NetWare Connectivity is already installed on your
computer.
To reinstall NetWare Connectivity, choose <OK>.
If you don't want to reinstall, choose <Exit>.
@  OK   \
@ Exit  \
@ Help  \
I HELP \
@0,1,"Already Installed
------------------------------------------------------------
The Setup program has detected that you already have NetWare
Connectivity installed on your computer (this was determined
by the presence of IPX.COM in your LAN Manager directory
tree.)
If you want to reinstall NetWare Connectivity, choose <OK>.
If you don't want to reinstall it, choose <Cancel>.
@ OK  \
I NetWare Connectivity Installation \
@0,1,"
The NetWare Connectivity feature of LAN Manager enables
an MS-DOS workstation to access both LAN Manager servers
and Novell NetWare servers simultaneously, using only a
single network adapter card.  NetWare Connectivity also
includes full support for Microsoft Windows (version 3.0
and later.)
(Note that after you install NetWare Connectivity, you
will be able to assign drive letters Q: through Z: only to
NetWare directories, not to LAN Manager directories.  For more
information, see your NetWare Connectivity documentation.)
To install NetWare Connectivity, choose <OK>.
@  OK   \
@ Exit  \
@ Help  \
I HELP \
@0,1,"NetWare Connectivity Installation
------------------------------------------------------------
To install NetWare Connectivity, choose <OK>.
To exit Setup without installing, choose <Cancel>.
@ OK  \
I LAN Manager Path Needed \
@0,1,"
Setup cannot find the path to your LAN Manager directory.
Please type the full path below (including drive letter)
and choose <OK>.
@ OK  \
@ Exit  \
@ Help  \
@5,1,"LAN Manager Path:  [                    ]",0,20,"C:\LANMAN.DOS",20
I HELP \
@0,1,"LAN Manager Path Needed
------------------------------------------------------------
Type the path to the computer's LAN Manager directory, and
then choose <OK>.  When you type the path, be sure to include
the drive letter.
Examples:
    C:\LANMAN.DOS
    D:\NETWORK
@ OK  \
I NetWare Windows Driver Installation \
@0,1,"
For NetWare Connectivity to fully support Microsoft Windows,
Windows network drivers for both LAN Manager and NetWare must
be installed on the computer.  Setup has detected that the NetWare
drivers are not installed.  In order to install these drivers, this
program will start the Windows Setup program.
For information on what you need to to while in Windows Setup,
choose <Help>.
When ready to begin Windows Setup, choose <OK>.
If you don't want to install full Windows support for
NetWare Connectivity, choose <Cancel>.
@  OK   \
@ Cancel  \
@ Help  \
I HELP \
@0,1,"NetWare Windows Driver Installation
------------------------------------------------------------
(Click scroll bar or press PageDown to see more text.)
If you want to install the Windows drivers for NetWare,
choose <OK>. The Windows Setup program will start. While
you are in the Windows Setup program, do the following:
  1) Use the Up Arrow key to select the `Network:' line, then
     press ENTER.
     A list of networks appears.
  2) Select `Novell NetWare' from the list and press ENTER.
  3) Press ENTER to confirm your configuration.  You will be
     prompted to insert one or more disks, and Windows Setup
     will copy the correct drivers to your computer.
     When Windows Setup is finished, you'll be returned to NetWare
     Connectivity Setup.
@ OK  \
I LAN Manager Windows Driver Installation \
@0,1,"
For NetWare Connectivity to fully support Microsoft Windows,
Windows network drivers for both LAN Manager and NetWare must
be installed on the computer.  Setup has detected that the
LAN Manager drivers are not installed.  In order to install these
drivers, this program will start the Windows Setup program.
For information on what you need to to while in Windows Setup,
choose <Help>.
When ready to begin Windows Setup, choose <OK>.
If you don't want to install full Windows support for
NetWare Connectivity, choose <Cancel>.
@  OK   \
@ Cancel  \
@ Help  \
I HELP \
@0,1,"LAN Manager Windows Driver Installation
------------------------------------------------------------
(Click scroll bar or press PageDown to see more text.)
If you want to install the Windows drivers for LAN Manager,
choose <OK>. The Windows Setup program will start. While
you are in the Windows Setup program, do the following:
  1) Use the Up Arrow key to select the `Network:' line, then
     press ENTER.
     A list of networks appears.
  2) Select the correct network from the list and press ENTER.
     The correct network depends on your version of LAN Manager
     and whether the computer runs LAN Manager Enhanced or
     LAN Manager Basic.
  3) Press ENTER to confirm your configuration.  You will be
     prompted to insert one or more disks, and Windows Setup
     will copy the correct drivers to your computer.
     When Windows Setup is finished, you'll be returned to NetWare
     Connectivity Setup.
@ OK  \
I Provide Disk \
@0,1,"
NetWare Connectivity requires one of the files NET%1.COM or NETX.COM
from the NetWare install disks to be copied into the LAN Manager
installation.  This file can be found on one of the following disks:
    WSGEN, SHGEN-1, or SHGEN-2
Please insert the disk containing the file into drive A:, or type
the full path (including drive letter) of a directory containing
the file.
Drive letter or full path:
@ OK  \
@ Exit  \
@ Help  \
@11,28,"[                              ]",0,1,"A:",30
I HELP \
@0,1,"Provide Disk
------------------------------------------------------------
Put the disk containing the NetWare shell program (either
NET3.COM, NET4.COM, NET5.COM, or NETX.COM) into the floppy
drive and choose <OK>.  If this file can be found on a
network directory, you can type the path to that directory
instead. (For example, N:\NWFILES.)
To save time, before you install NetWare Connectivity on
another workstation you might want to copy the NetWare shell
program to the disk you use for installation.  This way, the
NetWare Connectivity Setup program won't have to ask for
this disk.  If you do this, copy the NetWare shell program
to the same directory that the NWSETUP.EXE program is in.
@ OK  \
I Information  \
@0,1,"
Linking IPX.COM.
Please wait...
I Information  \
@0,1,"
Saving Configuration.
Please wait...
I NetWare File(s) Not Found \
@0,1,"
One or more of the following NetWare files could not be
found on the NetWare install disks:
    NLINK.EXE
    IPX.OBJ
Therefore, IPX.COM cannot be generated.
When you choose <OK>, the NetWare Connectivity Setup program
will end.  You should then try copying these files to the directory
containing the NetWare Connectivity Setup program (NWSETUP.EXE),
and then run NWSETUP again.
@ OK  \
I Warning  \
@0,1,"
The LAN Manager path you specified is not valid.
Choose <OK> to continue with the installation.
@ OK  \
I Installation Complete  \
@0,1,"
NetWare Connectivity has been successfully installed.
When you choose <OK>, the NetWare Connectivity Setup program
ends. You must then use the LAN Manager Setup program to bind
the IPX protocol to a network adapter card driver.
If you will install NetWare Connectivity on more workstations,
you can save time by first copying the IPX.COM you generated
on this workstation to the disk you use for installation.
Copy it to the same directory that contains NWSETUP.EXE.
For more information, see the NetWare Connectivity
Administrator's Guide.
@ OK  \
I Installation Complete  \
@0,1,"
NetWare Connectivity has been successfully installed.
To make the changes to your NetWare Connectivity
configuration take effect, you must reboot your
computer.
@ OK  \
I Invalid IPX.COM on PATH  \
@0,1,"
The first version of IPX.COM found on the computer's path is
not the version of IPX.COM used for NetWare Connectivity.
When you finish installing NetWare Connectivity, please edit your
PATH variable so that the directory containing the version of IPX.COM
used by NetWare Connectivity is the first IPX.COM in the path.
This version of IPX.COM is in a subdirectory of your LAN Manager
directory.  If the computer has LAN Manager Enhanced, it is in the
NETPROG subdirectory; if the computer has LAN Manager Basic, it is
in the BASIC subdirectory.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I IPX.COM Not On PATH  \
@0,1,"
The file IPX.COM could not be found in the path specified with the
PATH environment variable.  IPX.COM is located in a subdirectory
of your LAN Manager directory: it is in the NETPROG subdirectory
on computers with LAN Manager Enhanced, and in the BASIC subdirectory
on computers with LAN Manager Basic.
When you finish installing NetWare Connectivity, please edit your
path environment variable so that it includes the directory that
contains IPX.COM.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I Windows Version Not Supported \
@0,1,"
Windows support for NetWare Connectivity requires Windows version
3.0 or later.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I No Windows Support  \
@0,1,"
You have chosen not to install the drivers necessary for full
Windows support of NetWare Connectivity.
Setup will continue installing NetWare Connectivity without
Windows support.
@ OK  \
I Windows Setup Could Not Run \
@0,1,"
The Windows Setup program could not be found or was unable
to run.
Full Windows support for NetWare Connectivity cannot be installed.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I Windows Configuration Failure \
@0,1,"
An error occurred during configuration of the Windows installation
for dual network support.  NetWare Connectivity can still be
installed on your computer, but it won't have full support for
Windows.
After you complete the installation of NetWare Connectivity, you
may want to restore the SYSTEM.INI file from its backup, SYSTEM.BAK.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I Could Not Edit SYSTEM.INI \
@0,1,"
An error occured while changes were being made to the Windows
SYSTEM.INI file.  NetWare Connectivity can still be installed
on your computer, but it won't have full support for Windows.
After you complete the installation of NetWare Connectivity, you
may want to restore the SYSTEM.INI file from its backup, SYSTEM.BAK.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I Could Not Back Up SYSTEM.INI \
@0,1,"
The NetWare Connectivity Setup program could not back up the
Windows SYSTEM.INI file to SYSTEM.BAK.  NetWare Connectivity can
still be installed on your computer, but it won't have full support
for Windows.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I Could Not Copy LAN Manager Windows Drivers \
@0,1,"
Attempts to copy the LAN Manager dual-network Windows drivers failed.
These files are DUALNET.DRV, VDUALNET.386, and VLANMAN.386.
After the NetWare Connectivity Setup program ends, copy these files
from the NetWare Connectivity disk to the SYSTEM subdirectory
of your Windows directory, then restart the NetWare Connectivity
Setup program.
To continue installing NetWare Connectivity, choose <OK>.
@ OK  \
I ** Error **  \
@0,1,"
The computer's operating system is not
supported.  NetWare Connectivity runs
only on MS-DOS version 3.30 and later.
@ Exit  \
I ** Error **  \
@0,1,"
An error was encountered while sensing
whether the computer's operating system
was MS-DOS or MS OS/2.
@ Exit  \
I ** Error **  \
@0,1,"
An error was encountered while sensing
the version number of the local
operating system.
@ Exit  \
I ** Error **  \
@0,1,"
An error was encountered while sensing
the path to the LAN Manager
installation.
@ Exit  \
I ** Error **  \
@0,1,"
An error was encountered while sensing
the path to the Windows installation.
@ Exit  \
I ** Error **  \
@0,1,"
An initialization error occurred.
@ Exit  \
I ** Error **  \
@0,1,"
An error occurred during file copy.
@ Exit  \
I ** Error **  \
@0,1,"
IPX.COM generation failed.
@ Exit  \
I ** Error **  \
@0,1,"
An error occurred sensing the IPX.COM
version.
@ Exit  \
I ** Error **  \
@0,1,"
An error occurred editing CONFIG.SYS.
@ Exit  \
I ** Error **  \
@0,1,"
An error occurred during the editing of
SETUP.INI.
@ Exit  \
I ** Error **  \
@0,1,"
NetWare Connectivity Setup cannot run in an
MS-DOS shell or Windows MS-DOS prompt.
Exit the shell or Windows and run NWSETUP
from the MS-DOS command line.
@ Exit  \
I ** Error **  \
@0,1,"
NetWare Connectivity Setup has detected
that sufficient free disk space does not
exist on the drive containing your LAN
Manager installation.
At least 1 megabyte must be available
on the drive containing your LAN Manager
installation to install NetWare
Connectivity.
@ Exit  \
I ** Error **  \
@0,1,"
An error occurred sensing the amount of
free disk space available on the drive
containing your LAN Manager installation.
@ Exit  \
IInstalling Files \
@1,0," Installing files from:
 files left to copy.
IProvide Disk \
@1,0," Please insert the disk labelled
 or type a new path.
@5,0,"[                               ]",0,1,"",31
@ OK  \
@ Exit  \
@ Help  \
IHelp \
@0,0,"
Provide Disk
-------------------------------------------------------
Place the specified disk in the specified drive.
If the needed files are in a location other than the
specified drive, you have the option of typing a
driveletter, or typing a driveletter and path.
<OK> proceeds.
<Exit> exits.
@ OK  \
IConfirm Exit \
@1,0," Are you sure you want to exit?
@ Resume  \
@ Exit  \
@ Help  \
IHelp \
@0,0,"
Confirm Exit
-------------------------------------------------------
You have issued the command to exit.
You have the option of proceeding with the exit, or
canceling the exit, returning to the previous dialog
box, and continuing the current procedure.
<Resume> returns you to the previous dialog box.  You
can continue the procedure.
<Exit> complete the exit.
@ OK  \
IRemoving Files \
@1,0," Please wait... "
IChecking Files \
@1,0," Please wait... "
I*** Error *** \
@1,0," Unable to create directory. "
@ Exit  \
I*** Error *** \
@1,0," An error occurred while reading the
 file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," An error occurred while writing the
 file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," An error occurred while creating the
 file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," An error occurred while decompressing
 the file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," Unable to find the file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," A problem was detected with the
 format of the file:
 Error Code:  %2
@ OK  \
I*** Error *** \
@1,0," No disk was found on drive %1.
 Please check the drive.
@ Retry  \
@ Exit  \
@ Help  \
IHelp \
@0,0,"
Error, No Disk Found
-------------------------------------------------------
A disk cannot be found in the selected drive.
Verify that:
* A disk is inserted in the selected drive
* The inserted disk is formatted
* The disk drive is closed
<Retry> reattempts the procedure.
<Exit> cancels and exits the procedure.
@ OK  \
I*** Error *** \
@1,0," A problem was detected with the disk
 in drive %1.
 The disk may be damaged.  Try the disk again,
 or try a different disk.
@ Retry  \
@ Exit  \
@ Help  \
IHelp \
@0,0,"
Error, Disk Problem
-------------------------------------------------------
The disk in the selected drive may be damaged.
Verify that the disk is properly inserted and that the
disk drive is closed.
You can retry this disk, or you can try a new disk.
<Retry> reattempts the procedure.
<Exit> cancels and exits the procedure.
@ OK  \
IDummy Title \